Develop a preliminary single-family circulation strategy supporting universal access, aging in place, safe movement, adaptable rooms, and dignified long-term use.
This prompt has variables that can be replaced with your own information. Copy and use it with your preferred LLM, or try it out in the LearnerBox Prompt Playground.
Act as an experienced residential architect specializing in universal design and aging-in-place planning.
Develop a preliminary circulation and spatial-access strategy using the information below.
Project location and climate:
{{project_location}}
Household profile and future-use goals:
{{household_profile}}
Site and building parameters:
{{site_building_parameters}}
Required rooms and functions:
{{space_requirements}}
Mobility, sensory, or support considerations:
{{access_requirements}}
Applicable codes, standards, and project constraints:
{{codes_constraints}}
Planning requirements:
1. Establish universal-design objectives for independent movement, dignity, safety, adaptability, caregiver support, visitability, and future modification.
2. Create a circulation hierarchy from site arrival and parking through entrance, living spaces, kitchen, bedrooms, bathrooms, laundry, storage, outdoor areas, and emergency egress.
3. Identify a step-free primary route from property access to essential daily-use spaces.
4. Recommend preliminary dimensional targets for doors, corridors, turning areas, thresholds, reach ranges, furniture clearances, and resting points, subject to local verification.
5. Address lighting, visual contrast, wayfinding, slip resistance, handrail opportunities, floor transitions, and safe movement.
6. Locate at least one accessible or adaptable bedroom and bathroom on the principal living level where feasible.
7. Create an adaptable bathroom strategy covering maneuvering, shower access, future grab-bar reinforcement, toilet transfer space, vanity access, storage, privacy, and caregiver assistance.
8. Create a kitchen circulation strategy covering work zones, seated and standing use, aisle clearance, appliance access, storage reach, lighting, future adjustment, and shutoff access.
9. Identify conflicts among accessibility, privacy, compactness, cost, structure, and aesthetics.
10. Propose phased measures under: include now, rough-in now, allow space now, retrofit later, and avoid because future conversion would be difficult.
11. Include a room adjacency and circulation matrix.
12. Identify pinch points and inaccessible dead ends.
13. Do not certify code, accessibility, structural, or medical suitability.
14. Do not invent regulations, dimensions, site conditions, or household needs.
15. Flag items requiring licensed architectural, accessibility, structural, MEP, occupational-therapy, contractor, or authority review.
Present the result as:
{{output_format}}
Include:
- universal-design objectives;
- arrival and entry strategy;
- principal circulation route;
- room adjacency matrix;
- room-by-room access criteria;
- adaptable bedroom, bathroom, and kitchen strategies;
- phased adaptation schedule;
- pinch-point review;
- professional validation checklist; and
- preliminary recommendations.Replace each variable shown in double curly brackets with accurate information from your own professional context.
{{project_location}}
Example: Example: Chennai, India — hot-humid coastal climate
Location affects code, weather protection, materials, and site access.
{{household_profile}}
Example: Describe current occupants, guests, caregivers, likely future occupants, and long-term living goals.
Distinguish current needs from anticipated future needs.
{{site_building_parameters}}
Example: Provide plot size, levels, setbacks, orientation, parking, floor area, and existing conditions.
Circulation planning must fit real site and building limits.
{{space_requirements}}
Example: List bedrooms, bathrooms, living areas, kitchen, workspaces, storage, outdoor spaces, and service rooms.
Include essential daily-use functions and desired adjacencies.
{{access_requirements}}
Example: Describe step-free access, turning, contrast, hearing, reach, caregiver, or future-adaptation needs.
Use client-stated or documented needs without medical assumptions.
{{codes_constraints}}
Example: Provide local codes, accessibility references, budget, structure, heritage, or construction constraints.
Use current official requirements and verify locally.
{{output_format}}
Choose the format needed for concept planning or client review.
A preliminary universal-design circulation plan containing step-free routes, adaptable essential spaces, adjacency analysis, dimensional targets, phased adaptation measures, conflicts, and professional validation requirements.
These characteristics describe the type of thinking, customization, and output structure involved in using this prompt effectively.
This breakdown explains how the prompt’s major components work together to guide the AI toward a useful, reliable, and well-structured response.
Positions the AI as a universal-design residential architect.
Defines location, household, site, spaces, access needs, and constraints.
Requires a whole-house circulation and adaptability strategy.
Prevents unsupported compliance claims, invented dimensions, and medical assumptions.
Requires objectives, routes, matrices, room criteria, phased actions, conflicts, and validation.
Location, household, site, rooms, access needs, codes, and output format.
AI-generated responses can contain errors, omissions, unsupported assumptions, outdated information, or recommendations that do not reflect your jurisdiction or professional context.
Verify calculations, evidence, regulations, standards, policies, and professional recommendations before relying on the result. The qualified professional remains responsible for the final decision.
Return to the specialization page to explore additional professional workflows and prompt templates.
Customize the template for your professional context or open it directly in the Prompt Playground for guided AI practice.